Main Functions
Digital IN/OUT interface
In the GO-5000M-PGE-UV, the digital IN/OUT capability in the software control tool can assign
the necessary signals needed for the system.
Line Selector
In the Line Selector, the following input and output signals can be assigned.
Note1: Select and connect the line source signal against the item selected in the line selector.
Line Source
Line source signal can be selected from the following table to connect it to the line item
which is selected in the line selector.
Line Mode
Indicates the status of the interface. (Input, Output or Internal)
Line Inverter
Sets the polarity of the selected input or output. (False or True)
Line Status
Indicates the status of the selected signal, input or output (True=High or False=Low)
— 19 —
GO-5000M-PGE-UV