Valve Body Assembly Components; Automatic Transmission Unit Assembly - Suzuki Grand Vitara Manual

5A-126 Automatic Transmission/Transaxle:

Valve Body Assembly Components

5
1
1. Manual valve
2. TCC control solenoid valve
3. Pressure control solenoid valve
4. Detent spring

Automatic Transmission Unit Assembly

CAUTION
!
When replacing pressure control solenoid
valve and/or TCC pressure control solenoid
valve, it is strictly required to replace it
together with valve body assembly as a set.
Replacing pressure control solenoid valve
and/or TCC pressure control solenoid valve
independently may cause excessive shift
shock.
1) Measure inside diameter of transmission case
bushing. If inside diameter exceeds limit, replace
transmission case.
Transmission case bushing inside diameter
standard
38.113 – 38.138 mm (1.5005 – 1.5015 in.)
(a)
12
(a)
11
6
4
8
5. Plate
6. Shift solenoid valve A
7. Shift solenoid valve B
8. Over drive (O/D) brake apply
tube
S5JB0A5106088
www.CarGarage.ir
13
9. Solenoid clamp
10. Solenoid clamp bolt
11. Shift solenoid bolt
12. Detent spring bolt
2) After applying A/T fluid to new O-rings, install them
to reverse brake piston (3), reaction sleeve (2) and
secondary reverse piston (1).
www.CarGarage.ir
S5JB0A5106087
(a)
11
10 (a)
7
9
2
3
I5JB0A510127-01
13. Valve body assembly
: 5.5 N⋅m (0.55 kgf-m, 4.0 lb-ft)
I5JB0A510129-01
IYSQ01510236-01