Removed Command - Agilent Technologies 8163A Programming Manual

GPIB Command Compatibility List
Command
*SRE/?
*TRG
ABORt
STATus:OPERation:
NTRansition/?
STATus:OPERation:
PTRansition/?
STATus:QUEStionable:
NTRansition/?
STATus:QUEStionable:
PTRansition/?
SYSTem:BEEPer:STATe/?
*SAV
*RCL
BDATA?
DOSMODE/?
TRACe:CATalog?
TRACE:DATA?
TRACE:POINts?
WAVEACT
misc 200
186

Removed Command

Table 10 contains details of commands that have been removed without
replacement.
Table 10 Removed Commands
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System,
& Agilent 8166A Lightwave Multichannel System, Third Edition
Change
No support for this command/query.
No support for triggered commands.
This command is not supported; in every case, the bus is
blocked during command execution.
These status model features are not supported.
Beeper access is not supplied.
User interface or GPIB settings cannot be stored or re-
called.
Memory card access is not provided.
The TRACe tree is not supported; the CC_UNCAL curve
does not exist.
Alignment to external wavemeter is not supported.
Risetime control is not supported yet.
Removed Command
Affects
Both
8153
8153
8153
8153
8167/8
8167/8
8167/8
8167/8
8167/8