Agilent Technologies 8163A Programming Manual page 43

Specific Command Summary
Command
:TIME/?
:VERSion?
:SYSTem:COMMunicate:GPIB
[:SELF]:ADDress/?
:TRIGger
:CONFiguration/?
:TRIGger:CONFiguration
:EXTended/?
:FPEDal/?
:TRIGger[n][CHANnel[m]]
:INPut/?
:OUTPut/?
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
Table 4 Specific Command Summary (continued)
Description
Sets or returns the instrument's internal time.
Returns the instrument's SCPI version.
Sets or returns the GPIB address.
Generates a hardware trigger.
Sets or returns trigger configuration.
Sets or returns extended trigger configuration.
Enables/disables the Input Trigger connector to be triggered using a
Foot Pedal or returns whether the Input Trigger connector can be
triggered using a Foot Pedal.
Sets or returns the incoming trigger response .
Sets or returns the outgoing trigger response.
Specific Commands
Page
page 65
page 66
page 66
page 118,
page 124
page 122
page 124
page 124
page 119
page 121
43