Agilent Technologies 8163A Programming Manual page 164

The Agilent 816x VXIplug&play Instrument Driver
164
10 The Manage Instrument Drivers window appears, click on the
Finish button.
11 The first window appears again, click on the New VI button.
12 Select File and then select Convert CVI FP file .
13 The Select a CVI Function Panel file window appears,
locate the hp816x.fp file, which is normally installed into the path
<drive>:VXIPNP\winXX\hp816x, where XX stands for NT, or 95.
14 Press Open .
15 The CVI Function Panel Converter window appears.
16 Click on Browse... and browse to the following Destination Directory:
\LabView\instr.lib\hp816x\hp816x.llb
17 Press Save
Press
18
Options...
appears. Check that the options are the same as displayed in the
figure below:
Figure 15 FP Conversion Options Box
N OT E
You must check the Add Front Panel Controls for Size of
Array Parameters box. There will be a front panel control created for
each VI that requires you to assign the array size.
19 Press OK. The CVI Function Panel Converter
20 Press OK .
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System,
& Agilent 8166A Lightwave Multichannel System, Third Edition
Using Visual Programming Environments
.
, the
FP Conversion Options
.
window
Ã
window appears.
Ã