Agilent Technologies 8163A Programming Manual page 63

Status Reporting – The STATus Subsystem
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
:STATusn:QUEStionable:CONDition?
:STATusn:QUEStionable:CONDition?
Returns the Questionable Slot Status Condition Register for slot n.
none
The results for the individual slot events (a 16-bit signed integer value, where 0 ≤ value ≤
32767):
Bit Mnemonic
8-15 Not used
7 Slot n: Duty cycle is out of range
6 Slot n: ARA recommended
5 Slot n: Module is out of specification
4 Slot n: Module has not settled
3 Slot n: Laser protection on
2 Slot n: Temperature out of range
1 Slot n: Zeroing failed
0 Slot n: Excessive Value
Every nth bit is the summary of slot n.
stat1:ques:cond? → +0<END>
:STATusn:QUEStionable:ENABle
:STATusn:QUEStionable:ENABle<wsp><value>
Sets the bits in the Questionable Slot Status Enable Mask (QSSEM) for slot n that enable
the contents of the Questionable Slot Status Register (QSSR) for slot n to affect the QS-
ESR.
Setting a bit in this register to 1 enables the corresponding bit in the QSSER for slot n to af-
fect bit n of the QSESR.
The bit value for the QSSEM as a 16-bit signed integer value (0 .. +32767)
none
stat:ques:enab 128
:STATusn:QUEStionable:ENABle?
:STATusn:QUEStionable:ENABle?
Returns the QSSEM for slot n
none
The bit value for the QSSEM as a 16-bit signed integer value (0 .. +32767)
stat:ques:enab? → +128<END>
Instrument Setup and Status
Decimal Value
0
128
64
32
16
8
4
2
1
63