Agilent Technologies 8163A Programming Manual page 86

Measurement Operations & Settings
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
86
:SENSe[n]:[CHANnel[m]]:POWer:REFerence?
:SENSe[n]:[CHANnel[m]]:POWer:REFerence?<wsp>TOMODule|TOREF
Returns the sensor reference value.
TOMODule: Returns the reference value in dB used if you choose measurement
relative to another channel
TOREF: Returns the reference value in Watts or dBm if you choose measure-
ment relative to a constant reference value
The reference as a float value.
sens1:pow:ref? toref
All power meters
Master and slave channels are independent.
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:DISPlay
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:DISPlay
Takes the input power level value as the reference value.
none
none
sens1:pow:ref:disp
All power meters
Master and slave channels are independent.
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:STATe
:SENSe[n]:[CHANnel[m]]POWer:REFerence:STATe<wsp><boolean>
Sets the measurement units to relative or absolute units.
A boolean value:
none
sens1:pow:ref:stat 1
All power meters
Master and slave channels are independent.
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:STATe?
:SENSe[n]:[CHANnel[m]]POWer:REFerence:STATe?
Inquires whether the current measurement units are relative (dB) or absolute (Watts or
dBm).
none
A boolean value:
sens1:pow:ref:stat? → 1<END>
All power meters
Master and slave channels are independent.
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System,
& Agilent 8166A Lightwave Multichannel System, Third Edition
Measurement Functions – The SENSe Subsystem
→
+1.00000000E-006<END>
0 or OFF: absolute
1 or ON: relative
0: absolute
1: relative