Agilent Technologies 8163A Programming Manual page 39

Specific Command Summary
Command
:SENSe[n][:CHANnel[m]]:POWer:REFerence
:DISPlay
:STATe/?
:STATe:RATio/?
:SENSe[n][:CHANnel[m]]:RETurnloss:CALibration
:FACTory
:REFLectance
:TERMination
:SENSe[n][:CHANnel[m]]:RETurnloss:CORRection
:FPDelta[l]/?
:REFLectance[l]/?
:SENSe[n][:CHANnel[m]]:RETurnloss:CALibration
:FACTory
:COLLect:REFLectance
:COLLect:TERMination
:SENSe[n][:CHANnel[m]]:RETurnloss:CORRection
:FPDelta[n]/?
:REFLectance[n]/?
:SLOT[n]
:EMPTy?
:IDN?
:OPTions?
:TST?
:SLOT[n][:HEAD[m]]
:EMPTy?
:IDN?
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
Table 4 Specific Command Summary (continued)
Description
Sets the reference level for a sensor from the input power level.
Sets or returns whether sensor results are in relative or absolute
units.
Sets or returns whether sensor results are displayed relative to a
channel or to an absolute reference.
Sets or returns
Sets or returns
Selects the factory-set calibration values
Sets the Reflection Reference calibration values to the values cur-
rently measured by the chosen return loss module
Sets the Reflection Reference calibration values to the values cur-
rently measured by the chosen return loss module
Sets or returns the front panel delta, that is, the loss variation value
due to the front panel connector
Sets or returns Return Loss Reference, the return loss value of your
reference reflector.
Returns whether the module slot is empty.
Returns information about the module.
Returns the module's options.
Returns the latest selftest results for a module.
Returns whether an optical head is connected.
Returns information about the optical head.
Specific Commands
Page
page 86
page 86
page 87
page 89
page 89
page 90
page 90
page 91
page 89
page 89
page 90
page 90
page 91
page 69
page 70
page 70
page 70
page 71
page 71
39