Agilent Technologies 8163A Programming Manual page 109

Signal Generation – The SOURce Subsystem
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence:DISPlay
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence:DISPlay
Sets the reference wavelength to the value of the output wavelength (λ → λ
sets the frequency offset (df) to zero.
none
none
sour2:wav:ref:disp
All tunable laser and DFB modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
<value>|MIN|MAX|DEF
Sets the number of cycles.
The number of cycles is an integer value.
Also allowed are:
none
wav:swe:cycl 3
All tunable laser modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[<wsp>MIN|MAX|DEF]
Returns the number of cycles.
none
Also allowed are:
The number of cycles as an integer value.
→
wav:swe:cycl?
All tunable laser modules
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
+3<END>
Measurement Operations & Settings
<wsp>
), that is,
0
109