Table of Contents
Advertisement
1
About this manual
This manual contains descriptions and important information for the safe and trouble-free use of the
charging system. The manual is part of the charging system and must be accessible at all times to all
persons working on and with the charging system. The manual must be kept in a clearly legible
condition.
The personnel must have carefully read and understood this manual before starting any work. The
basic prerequisite for safe working is the observance of all specified safety and warning instructions as
well as handling instructions in this manual.
In addition to the instructions in this manual, the local accident prevention regulations and the national
industrial safety regulations apply.
Illustrations are for basic understanding and may differ from the actual design of the charging system.
More information about the product: https//www.compleo-cs.com/service/installation-service.
1.1
Scope of application
This manual is valid for the following article numbers of the charging system Compleo SOLO advanced:
A01Aexxxxx.xx
1.2
Further requirements
The operator must ensure that the charging system is properly installed and used as intended.
During installation and start-up, the national legal requirements and regulations for accident
prevention must be observed. In Germany these include the requirements according to DIN VDE 0100
and the accident prevention regulations according to DGUV V3.
Before the system is released, an appropriate test must be carried out to ensure all safety features and
the proper functionality of the charging system. In addition, the operator must ensure the operational
safety of the charging system by means of regular maintenance (see chapter 10.1 Maintenance plan,
page 93).
This document reflects the state-of-the-art of the product at the time of publication.
6
A01Axxxxxx.xx | 04
2022-11
Advertisement
Table of Contents
