Table of Contents
Advertisement
The charging system is intended exclusively for charging electric vehicles.
The charging system is suitable for public and semi-public areas and can be used indoors and
outdoors.
The charging system is intended exclusively for stationary installation.
Any use beyond this is considered improper use. The manufacturer is not liable for damages resulting
from this.
2.3
Foreseeable misuse
The use of the charging system as a power source for other power consumers is not in accordance
with its intended use and is considered misuse.
Only charging cables of type 2/ 20 A or only charging cables of type 2/ 32 A may be used on charging
systems equipped with a charging socket type 2. Charging cables that deviate from this are not
accepted by the systems.
Charging systems may only be connected to the power supply via a fixed and non-separable supply
line.
2.4 Safety instructions for the user
This charging system may only be used in the manner described in this manual. If the charging system is
used for other purposes, the operator may be endangered and the charging equipment may be
damaged. This manual must always be accessible. Note the following points:
•
If no charging process is active, anchor any existing charging cables on the charging system in
the brackets provided or wrap them around the housing of the charging system.
•
The distance between a charging system and a vehicle must not exceed 3 metres.
•
The charging system may only be operated when completely closed. Do not remove covers
inside the charging system.
2.5
Personnel qualification
Qualified and trained electricians meet the following requirements:
•
Knowledge of general and special safety and accident prevention regulations.
•
Knowledge of the relevant electrical engineering regulations.
•
Product-specific knowledge through appropriate training.
•
Ability to identify hazards associated with electricity.
DANGER
Danger due to electric current
Touching live parts will result in electric shock with serious injury or death.
•
Work on electrical components may only be carried out by a qualified electrician and in
accordance with electrical engineering rules.
•
Ensure they are de-energised and take suitable protective measures.
2022-11
A01Axxxxxx.xx | 04
11
Advertisement
Table of Contents
