5.10.13 Putting on the housing cover
Installation material and tools
•
2 TORX screws (4 x 16, V2A)
•
TORX-TR20 bit
•
Torque wrench
•
Profile half cylinder lock (option)
Fig. 28: Housing cover
48
(1)
Housing cover
(2)
Retaining screw with countersunk head
1.
Place the housing cover on the upper
1
retaining bar of the bottom shell and close
it downwards. Check for correct and tight
fit.
2.
Lightly press on the bottom of the housing
cover and secure it on the underside with
the screws supplied, ensuring the correct
tightening torques (M = 1.5 Nm).
2
A01Axxxxxx.xx | 04
2022-11