Table of Contents
Advertisement
7.2
Charging the vehicle
6.3 Configuration of the charging system with Compleo DUCTO, page 52
7.2.1
Authorisation
RFID:
1.
Hold the RFID card or chip in front of the RFID field.
LED lights up "green" when authorisation is successful.
2.
Follow the instructions on the display.
Giro-E:
1.
Hold the Girocard in front of the RFID reader.
LED lights up "green" when authorisation is successful.
2.
Follow the instructions on the display.
Remote authorisation:
1.
Download and install app for smartphone or tablet or start web interface.
2.
Follow the instructions of the app or web interface for the authorisation process.
LED lights up "green" when authorisation is successful.
3.
Follow the instructions on the display.
7.2.2
Charging process with type 2 socket
64
1.
The display indicates readiness for plugging in:
"Plug in plug".
2.
Plug in the charging cable in the socket of the charging system.
3.
The display indicates readiness for plugging in:
"Type 2 - Please connect vehicle".
4.
Insert the charging plug into the vehicle's socket.
5.
The display indicates charging process preparation:
"Vehicle connected",
"Preparing for charging".
6.
The display indicates the charging process:
"Charging started".
A01Axxxxxx.xx | 04
2022-11
Advertisement
Table of Contents
