Table of Contents
Advertisement
6.3 Configuration of the charging system with Compleo DUCTO
Compleo DUCTO refers to the software used to manage Compleo charging systems using an end
device.
Various parameters of the charging system can be set via the configuration interface.
The charging system management information is stored on the charging system itself. By specifying the
IP of the charging system in the browser of a suitable end device, such as a notebook, a start page is
called up and the connection to the charging system is established. After logging in, an overview of the
parameters that can be called up or changed is listed.
To connect to the charging system, the end device used must have an IP address in the same IP
address range.
NOTE
The following steps are illustrated using the example of a network configuration with
Microsoft Windows 10 and a simulated charging system.
The user must have administrator rights for network configuration.
6.3.1
Creating a network connection
52
1.
Connect a network-compatible end device
or computer to the data line of the
charging system.
2.
Follow the command path: Control Panel -
> Network and Internet -> Network
Settings.
3.
Show and open the properties of the
corresponding Ethernet connection by
right-clicking.
A01Axxxxxx.xx | 04
2022-11
Advertisement
Table of Contents
