About This Manual; Further Requirements - Compleo ADVANCED IMS bm SAM Operating Instructions Manual

1

About this manual

This manual contains descriptions and important information for the safe and trouble-free use of the
charging system. The manual is part of the charging system and must be accessible at all times to all
persons working on and with the charging system. The manual must be kept in a clearly legible
condition.
The personnel must have carefully read and understood this manual before starting any work. The
basic prerequisite for safe working is the observance of all specified safety and warning instructions as
well as handling instructions in this manual.
In addition to the instructions in this manual, the local accident prevention regulations and the national
industrial safety regulations apply.
Illustrations are for basic understanding and may differ from the actual design of the charging system.
1.1

Further requirements

A warranty with regard to function and safety is only given if this manual is observed. Compleo
Charging Solutions AG is not liable for personal injury or damage to property caused by failure to
observe the operating instructions.
The manufacturer of the charging system is not liable for consequential damage. The operator must
ensure that the charging system is properly installed and used as intended.
During installation and start-up, the national legal requirements and regulations for accident
prevention must be observed. In Germany these include the requirements according to DIN VDE 0100
and the accident prevention regulations according to DGUV V3.
Before the system is released, an appropriate test must be carried out to safeguard all safety features
and proper functionality of the charging system. Furthermore, the operator must ensure the
operational safety of the charging system through regular maintenance.
Compleo Charging Solutions GmbH assumes no liability for errors within these operating instructions.
This document reflects the state-of-the-art of the product at the time of publication. The contents of
this document are for information purposes only and are not the subject of a contract.
ATTENTION
A list of the normative references and regulations according to which the charging system was
designed and constructed can be found in the declaration of conformity. When installing and
commissioning a charging system from Compleo Charging Solutions, nationally applicable standards
and regulations must also be observed.
NOTE
All standards, regulations, test intervals and the like mentioned in this document are valid in
Germany. If a charging system is set up in another country, equivalent documents with a national
reference must be used.
4 A11XCXXXXX | 02 2023-02