5.10.14 Attaching the optional safety lock
Locking
1.
Break out the pre-punched opening in the housing cover and deburr.
2.
Insert the key into the lock and turn it until the locking lug is flush with the cylinder.
3.
Press the housing cover lightly at the bottom and insert the lock.
4.
Turn the key anticlockwise to the "horizontal" position and remove.
Unlocking
1.
Insert the key, turn it clockwise as far as it will go.
2.
Press the cover down slightly and remove the lock.
5.10.15 Safety sign
Fig. 29: Underside of housing cover
2022-11
If necessary, the operator can place a safety sign
on the left-hand safety screw.
A01Axxxxxx.xx | 04
49