Table of Contents
Advertisement
11 Decommissioning, dismantling and disposal
The decommissioning and dismantling of the charging system may only be carried out by a qualified electrician.
The national legal requirements and regulations must be observed.
DANGER
Danger due to electric current
Touching live parts will result in electric shock with serious injury or death.
•
Work on electrical components may only be carried out by a qualified electrician and in
accordance with electrical engineering rules.
•
Ensure they are de-energised and take suitable protective measures.
1.
Finish charging processes properly.
2.
Disconnect the charging system from the power supply.
–
Activate using the internally installed safety elements such as MCB, RCD and any installed
main switch.
–
Release the upstream fuse element of the charging system.
Dismantling may only be carried out after it has been established that no voltage is present and suitable
protective measures have been taken.
11.1 Disposal
The unit contains materials that can be recycled. To protect the environment and human health, disposal must
be carried out in accordance with the laws of the country and the existing take-back organisations.
•
Observe the requirements of the WEEE Directive 2012/19/EU.
•
Dispose of the unit accordingly only via the take-back organisation.
•
Dispose of dismantled components only via the take-back organisation.
NOTE
Incorrect or negligent disposal causes environmental pollution.
•
If you have any questions about environmentally friendly disposal, ask your specialist dealer or
the manufacturer for information.
96
A01Axxxxxx.xx | 04
2022-11
Advertisement
Table of Contents
