Table of Contents
Advertisement
7.1
Charging process
The Compleo SOLO charging system is produced in different versions. Depending on the configuration
of the charging system, the type of charger interfaces and the procedure for starting a charging
process differ.
During a charging process, the plug is locked in the vehicle.
If a ventilation function is requested from the vehicle, the charging system interrupts the charging
process.
The charging process stops automatically after the existing authorisation method has been successfully
executed.
This is followed by brief instructions on how to start and end a charging process. The brief instructions are
divided into variants and differ depending on the type of charger interface and operating method.
DANGER
Danger due to electric current
Damage to the charging systems or components may expose live parts.
Touching live parts will result in electric shock with serious injury or death.
•
Only operate the charging system when it is undamaged.
•
In the event of damage, immediately disconnect the charging system from the power supply at
the circuit breaker and take suitable safety measures to prevent it from being switched on
again.
•
Work on electrical components may only be carried out by a qualified electrician.
•
Repair work may only be carried out by the customer service.
2022-11
A01Axxxxxx.xx | 04
63
Advertisement
Table of Contents
