Page 1
The power to move Operating manual eBOX professional Article no. i00021648, i00021667, i00021743, i00021693 (Generation 3.5) Version 20230904...
Please note: These instructions for use contain information on • Any use of adapters and converters as well as the proper use of eBOX professional charging cable extensions is prohibited. (generation 3.5). The eBOX must be handled in accordance with these instructions for use.
Page 3
Operating manual | eBOX professional Danger Important Important Handling live components incorrectly The contents of the delivery must Check that the warranty seal on may cause grievous injuries and death. be checked for completeness and the back of the eBOX is intact. Do So heed at all times the five safety rules intactness.
Operating manual | eBOX professional Product overview Included in delivery 1x eBOX professional with attached notes for use 1x set of instructions for use with attached PUK for Bluetooth eBOX professional – Product details 1 Shutter 2 Socket/plug compartment 3 Type plate...
Page 5
Operating manual | eBOX professional Clicking the eBOX into the eCLICK Before mounting the eBOX, make sure there is no voltage across the eCLICK. If an eSMARTMETER is installed, make sure the ports are connected to the supplied data cable.
Page 6
Operating manual | eBOX professional Clicking the eBOX into the eCLICK Please prepare the installation by pulling down the locking bracket completely and ensuring to hold it firmly in this position. Now place the eBOX carefully on the eCLICK and push it firmly...
Page 7
Have the be carried out entirely by an electrician. Use the PUK of your eBOX at hand for this purpose. Compleo eCONFIG app for the configuration for commercial use. You will find the PUK on the back of these instructions for use.
Operating manual | eBOX professional Charging process The charging process consists of connecting Shortly after successful authentication, the LED your vehicle to the eBOX, authenticating the ring will begin to pulse blue and your vehicle will charging process, charging your vehicle and finally charge.
Operating manual | eBOX professional Troubleshooting Troubleshooting Vehicle not connected properly Most eBOX malfunctions occur due to incorrect • Vehicle LED remains on operation, which means they cannot be (LED ring does not light up): registered by the device and thus cannot be Error in communication between vehicle and displayed.
Operating manual | eBOX professional Technical data General Informationen Number of charging points Cable length (in cable version) 6.5 m Charging mode Mode 3 according to IEC 61851 Areas of application Indoor and outdoor IP code of the housing IP55...
SIM card, can be provided prior to production (frequency and direction dependent, maximum 4.4 dBi antenna gain); With use of private Compleo software services only via WLAN or LAN Control by grid operator Potential-free contacts available to connect to a grid control box...
Operating manual | eBOX professional Notes The product eBOX professional must always be Disposal used in conjunction with the eCLICK. The eCLICK and the eBOX are are electrical Electric vehicle charger characteristics devices. These must be disposed of accordingly according to IEC 61851-1 Ed. 3:...
Page 13
Compleo Charging Solutions GmbH & Co. KG. Compleo Charging Solutions GmbH & Co. KG Business address: Ezzestraße 8 44379 Dortmund...
Need help?
Do you have a question about the eBOX professional and is the answer not in the manual?
Questions and answers