7.3
Ending the charging process
7.3.1
Authorisation
RFID:
1.
Hold the RFID card or chip in front of the RFID field.
LED lights up "green" when authorisation is successful.
2.
Follow the instructions on the display.
Giro-E:
1.
Hold the Girocard in front of the RFID reader.
LED lights up "green" when authorisation is successful.
2.
Follow the instructions on the display.
Remote authorisation:
1.
The display indicates the charging process:
"Type 2 – Charged: XXX – Charging duration: XXX – Charge".
2.
Follow the instructions of the app or web interface for finishing the charging process.
7.3.2
Ending charging with type 2 socket
66
1.
The display indicates the end of the charging process:
"Type 2 – Charged: XXX – Charging duration: XXX - Ended".
2.
The display indicates readiness for plug removal:
"Type 2 – Pull the plug out of charging station to end - charging
time".
3.
Pull the charging plug out of the vehicle's socket.
4.
The display indicates the removal of the plug:
"Type 2 – Pull the plug out of charging station to end - charging
time".
5.
Pull out the charging cable from the socket of the charging system.
6.
The display indicates the completion of the charging process:
"Type 2 – Charging process completed".
"Type 2 – Charged: XXX – Charging duration: XXX – Have a good
trip."
A01Axxxxxx.xx | 04
2022-11