Page 1
Compleo eBOX professional Instructions for use (Generation 3.5)
Page 2
2 | Instructions for use Compleo eBOX professional Differences between generations 3.0 and 3.5 The new eBOX generation 3.5 builds on the benefits of generation 3.0. Nothing changes for you as a customer. The new generation offers you the following additional functions: •...
Content | 3 Content Safety information Product overview Clicking the Compleo eBOX into the Compleo eCLICK Compleo eBOX system configuration Charging process Troubleshooting Specifications Notes This document might not contain the latest changes to the product’s specifications or Imprint processes described herein.
4 | Safety information Safety information DANGER Danger Danger Important Important Keep equipment Handling live Turn off circuit eBOX bases have Danger to life and limb pack away from small components before remounting or sharp edges. Do not children. There is a incorrectly may replacing the eBOX.
Page 5
Compleo eBOX: intended use These instructions for use contain information The device is intended for outdoor and indoor on the proper use of eBOX professional use. (generation 3.5). The eBOX must be handled In public areas, the operator guarantees that...
6 | Product overview Product overview Included in delivery 1 eBOX professional with attached notes for use 1 set of instructions for use with attached PUK for Bluetooth Compleo eBOX professional – Product details Shutter Socket/plug compartment Type plate Notes for use...
Clicking the Compleo eBOX into the Compleo eCLICK | 7 Clicking the Compleo eBOX into the Compleo eCLICK 90° Before mounting the eBOX, make sure there is no voltage across the eCLICK. LAN 3 RJ45 (eBOX communication) LAN 2 RJ45...
Page 8
8 | Clicking the Compleo eBOX into the Compleo eCLICK Important Make sure that the flat ribbon data cables are not trapped between the eCLICK and eBOX when mounting the eBOX. Please prepare the installation by Now release the bracket and let it...
Page 9
Clicking the Compleo eBOX into the Compleo eCLICK | 9 Important Note Make sure that the The grub screw can eBOX clicks correctly only be fully screwed into the eCLICK. The in when the locking locking bracket must bracket is inserted be in the final position.
Technical commissioning and configuration must be Technical commissioning and configuration must be carried out entirely by an electrician. Have the PUK of your carried out entirely by an electrician. Use the Compleo This product contains eBOX at hand for this purpose.
Charging process | 11 Charging process The charging process consists of connecting your vehicle to the eBOX, authenticating the charging process, charging your vehicle and finally disconnecting your vehicle from the eBOX. Please make sure to carefully stow away any firmly connected cables after use (steps 1 and 2 are interchangeable).
12 | Troubleshooting Troubleshooting Troubleshooting Charging process malfunction Authentication error Most eBOX malfunctions occur due to incorrect In rare cases, the charging process is disrupted • Authentication LED remains on (LED ring operation, which means they cannot be or slowed down by external influences. This can flashes red briefly): registered by the device and thus cannot be occur for the following reasons:...
Page 13
Troubleshooting | 13 Faulty Bluetooth connection Danger Critical error • Bluetooth pairing button does not light up: Device error. The eBOX can no longer be used Error in Bluetooth communication between Warning of due to a device error and must the eBOX and your smartphone/tablet (only electrical voltage.
14 | Specifications General specifications Number of charging points Cable length (in cable version) 6.5 m Charging mode Mode 3 according to IEC 61851 Areas of application Indoor and outdoor IP code of the housing IP55 Protection class (impact resistance) IK10 according to IEC 62262:2002 UV protection Outdoor areas (F1)
Page 15
Specifications | 15 Working conditions -30 °C to +50 °C at full load output Operating temperature Thermal overload protection: output power reduced at higher temperatures Air humidity 5% to 95% as defined under IEC 61851-1 Ed.3/EN 61851-1 (2017) Max. altitude above sea level Max.
Page 16
SIM card, can be provided prior to production (frequency and direction dependent, maximum 4.4 dBi antenna gain); With use of private Compleo software services only via WLAN or LAN Authentication Free charging, smartphone app (eCHARGE+ app/third-party apps) via contract charging Authentication or direct payment via epowerdirect.com...
Page 17
Specifications | 17 UI/UX LED ring for charging status; Display/interaction 2 LED indicators for authentication and vehicle connection status, 1 LED button for Bluetooth connection Notes for use Attached to the side of the eBOX as a graphic External accessories Fault current protection switch type A (RCD type A): Personal protection 32A connection: ABB F204A-40/0.03, type A, 4-pole (short-time delay, operating voltage: 230/400 V AC)
Pole products. solvents. Disassembly 1. The product must be connected to an AC 8. The product eBOX professional in conjunction mains. with the eCLICK or coverage is rated electri- To disassemble the eBOX, you first have to cal protection class I.
Need help?
Do you have a question about the eBOX professional and is the answer not in the manual?
Questions and answers