Table of Contents
Advertisement
5 Installation
Installationsarbeite n
5.1
Installation work
The assembly and installation work requires specific technical qualifications and expertise. There is a
danger to life for persons who carry out work for which they have neither been qualified nor
instructed. The work may only be carried out by persons who are familiar with it, have been informed
about dangers and have the necessary qualifications.
Observe the national legal requirements and regulations during assembly and installation.
ATTENTION
Damage to the unit
Environmental influences due to rain, splash water or heavy dust exposure on exposed installation
components without an installation cover cause damage to the unit.
•
Do not leave the charging station unattended with the installation cover open.
5.2
Notes on mechanical installation
WARNING
Incorrect installation and start-up
Improper performance of work can lead to serious injuries and damage to property.
•
Work may only be carried out by trained specialist personnel.
•
Meet all safety requirements before installation.
•
Only carry out mechanical installation in a de-energized state.
•
Provide sufficient free space for the installation.
The installation site must be sufficiently accessible so that the charging system can be installed
and serviced without interference.
•
Use a suitable material and tool for installation.
The following description of installation with specific installation material is exemplary. Local conditions
are not dealt with in detail.
NOTE
The necessary installation material for wall mounting is included in the delivery.
22
A01Axxxxxx.xx | 04
2022-11
Advertisement
Table of Contents
