Installation; Location; Installation Work - Compleo ADVANCED IMS bm SAM Operating Instructions Manual

5 Installation

Incorrect installation can lead to personal injury and damage to property. It must be ensured that the
assembly and electrical installation are carried out professionally and that the local protective
measures and the specifications of the energy supplier are observed.
The unit may only be installed by a qualified electrician and persons who are demonstrably qualified.
5.1

Location

For professional installation, safe operation and barrier-free access to the charging system, the
following points must be observed when selecting the location.
• National or local regulations.
• Do not install the charging system in the hazard areas of:
– Flammable, combustible and explosive materials
– Running or jet water
• Do not install the charging system in the following areas:
– Areas that are potentially explosive (e.g. gas filling stations)
– Areas where backwater or storm water is to be expected
– Areas where flooding is to be expected
– Areas where heat domes or heat accumulation can occur
• The substrate must have sufficient strength and load-bearing capacity to withstand the
mechanical loads.
• Provide sufficient space to maintain the minimum distances:
– Approx. 120 cm between two charging systems
– 3 cm from the back of the charging system to other objects; on a concrete base in the
case of a mechanical installation
• Ensure a sufficient fresh air supply for cooling the charging system and heat dissipation.
• Comply with ambient conditions, see .
Installationsarbeite n
5.2

Installation work

The assembly and installation work requires specific technical qualifications and expertise. There is a
danger to life for persons who carry out work for which they have neither been qualified nor
instructed. The work may only be carried out by persons who are familiar with it, have been informed
about dangers and have the necessary qualifications.
Observe the national legal requirements and regulations during assembly and installation.
22 A11XCXXXXX | 02 2023-02