Touch Operations Check - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5.5.9 Touch Operations Check

This screen is used to check and calibrate touch switch operation.
Item
Operation check
Calibration
Touch Display Selection
Operation Check
Press a position on the screen, and check if the pressed position turns white. When the pressed position turns white, the switch is
activated normally.
If a position different from the pressed position turns white, press the [Calibration] switch.
Press the [Clear] switch to clear all white sections and the [Return] switch to return to the touch operations check screen.
Coordinates
(0, 0)
Displays a screen for checking that the touch switches operate properly.
The same screen can also be displayed by the following methods.
• Local mode  [I/O Check]  [Touch Switch]
• Power on option: Turning the power on with DIP switch 2 set to the ON position
Performs calibration.
Select a display supporting touch operation.
This setting is configured when the touch operation of the external display is not recognized automatically.
In addition, the following settings must be configured in the screen program.
[System Setting] → [Other] → [Multi-Display settings] → [Expand display screen]
For details on the multi-display settings, refer to the X1 Series Reference Manual 2.
5.5
Description
System Configurator
1
Back
2
3
4
5
6
7
Output
coordinates
8
9
10
5-95