Handling Data Changed In Local Mode - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5.4.19 Handling Data Changed in Local Mode

The following items set in the screen program can be changed in Local mode on the X1 series unit.
Item Setting in Local Mode *1
Network table LAN Setting
LAN2 Setting
Service Port
Time-Out
E-Mail Setting [E-Mail Setting]
Communication Parameter [Comm. Setting]
Buzzer Setting [System Setting]
Backlight Setting
Serial Setting
User Settings [User Settings]
*1 Settings can be made to prohibit changes in Local mode. For details, refer to
Settings Changed in Local Mode
• The screen program will not be overwritten. In any case where the X1 series unit is replaced such as due to a failure, the settings need
to be changed again in Local mode.
• The settings changed in Local mode are retained even if the power to the X1 series unit is turned off.
• If a setting is changed in Local mode, the Local mode setting takes priority.
To restore the settings of the screen program, press the [Restore Screen Data Settings] switch on the respective Local mode screen.
• When writing the screen program into the X1 series unit using V-SFT version 6, you can select whether to retain or clear the settings
changed on the unit (INI file).
<How to clear the INI file using V-SFT version 6>
1) Cable connection
Connect the X1 series unit to a computer using a LAN cable.
2) Starting V-SFT version 6
Start V-SFT version 6 on the computer and open the screen program.
3) Displaying the [Transfer] window
Click [Transfer]  [Download]. The [Transfer] window is displayed.
4) Selecting data to transfer
Select [Screen Data] for [Transfer Data].
Check the [Clear IniFile] in the [Option] window and click [OK].
5) Start downloading to the X1 series unit
Click [PC ]. Screen program transfer starts.
When the following dialog is displayed, click [Yes].
[System Setting]  [Ethernet Communication]  [Network Table]
[System Setting]  [Ethernet Communication]  [Local Port]
(page 5-30) [System Setting]  [Ethernet Communication]  [E-Mail]
(page 5-36) [System Setting]  [Hardware Setting]  PLC1 to PLC8
(page 5-42) [System Setting]  [Unit Setting]  [Buzzer]/[Backlight]
None
(page 5-57) Security
[System Setting]  [Other]  [Security Setting]
page
Setting in V-SFT Version 6
5-64.
5.4 Local Mode
1
2
3
4
5
6
7
8
9
10
5-63