Fuji Electric MONITOUCH X1 Series Hardware Specifications page 61

5 Operation Method
Switching between Screen Modes
X1 app (RUN mode)
5.
No.
1 System menu  [Local] switch
2 A V-SFT version 6 screen program switch wth [Function] set to [Switching to Local Mode]
3 System menu  [RUN] switch
4 Turn power off and back on again.
* Only when System Configurator  [Settings]  [Startup settings] is set to [HMI]
5 [Operation test]  [Start HMI app]
6 Turn power off and back on again.
* Only when System Configurator  [Settings]  [Startup settings] is set to [System
Configurator]
7 [Operation test]  [Exit System Configurator]
8 [Start Sys. Config.] switch in the menu icons
9 [Advanced mode]  [Windows Desktop Display]
* When the X1 series unit power is turned on with DIP switch 1 and 2 on the backside of the unit set to the ON position, System Configurator is displayed.
5-2
6.
Procedure
1. or 2.
3. or 4.
System Configurator *
9.
Windows desktop
X1 app (Local mode)
8.
7.
Remarks