Fuji Electric MONITOUCH X1 Series Hardware Specifications page 146

Setting Procedure
Initial setting
1. Set [Write filter setting] to [Invalid]. The X1 series unit automatically reboots.
For details on the write filter setting, refer to
2. Install the X1-SS security software.
Refer to the X1-SS instruction manual for the installation procedure.
3. Install and configure settings for user applications.
• Install user applications via Explorer. Refer to
• For details of settings, refer to
4. Press [Security Setting]  [Adding to list]  [Add all items] switch. Files in the X1 series unit are added to the whitelist.
Do not turn off the power while addition is in progress.
5. Press [Security Setting] and then set [Mode setting] to [Valid mode]. The X1 series unit automatically reboots.
6. Set [Write filter setting] to [Valid]. The X1 series unit automatically reboots.
For details on the write filter setting, refer to
Updating X1 application during operation / Adding user application
1. Set [Write filter setting] to [Invalid]. The X1 series unit automatically reboots.
For details on the write filter setting, refer to
2. Set [Startup setting (Operation Mode)] to [System Configurator]. The X1 series unit automatically reboots.
3. Press [Security Setting] and then set [Mode setting] to [Updating mode]. The X1 series unit automatically reboots.
4. Install the user application.
5. Press [Security Setting]  [Adding to list]  [Update list]. The application is added to the whitelist.
Do not turn off the power while addition is in progress.
6. Press [Security Setting] and then set [Mode setting] to [Valid mode]. The X1 series unit automatically reboots.
7. Set [Startup setting (Operation Mode)] to [HMI (Normal use)]. The X1 series unit automatically reboots.
The write filter setting is automatically changed to [valid].
For details on the write filter setting, refer to
page 5-75.
"Explorer" page 5-67.
"Settings" page 5-69.
page 5-75.
page 5-75.
page 5-75.
5.5 System Configurator
5-87
1
2
3
4
5
6
7
8
9
10