Security Setting (Optional) - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

Security Setting (Optional)

This screen is for configuring security settings.
The screen is available when the optional X1 Security Software (X1-SS) is purchased and installed.
Settings cannot be changed when [Write filter setting] is set to [Valid].
Set [Settings]  [Write filter setting] to [Invalid]. Refer to
Item
Mode setting
Adding to list
The following message is displayed if the security function cannot be used. Purchase and install the X1-SS.
Security Setting
The X1 Security Software (X1-SS) is a whitelisting
whitelist in advance.
*1 Whitelisting
This is a security method that utilizes a whitelist to define the programs that a user can run on a computer.
All applications other than those that have been confirmed to be safe by the administrator are blocked.
The opposite method is called blacklisting, in which malicious codes are listed. Any code on the list is automatically blocked if
detected.
The drawback of blacklisting is that the list constantly needs to be updated.
5-84
Set the operation mode of the security function.
Register applications to a whitelist.
*1
software that limits the execution of applications to those that are registered to a
"Write Filter Setting" page 5-75.
Description
Back