Fuji Electric MONITOUCH X1 Series Hardware Specifications page 90

Item
Port No.
Authentication No Authentication
POP before SMTP
SMTP-AUTH
POP3 IP Address
Use SSL/TLS Communication
Account Name
Password
Mail Setting
The [Mail Setting] tab window is used to specify destinations for sending e-mail notifications.
When e-mail settings have been configured using V-SFT version 6, the settings in the screen program are displayed.
Item
Sender's Mail Address Set the sender's mail address.
It is recommended to create a dedicated account for the X1 series unit on the mail server and to set its address here.
Sender's Name Set the sender's name. A name can only consist of either one- or two-byte characters; not both.
It is displayed in the "Sender" field in an incoming e-mail.
Subject Set the subject.
It is displayed in the "Subject" field in an incoming e-mail.
Recipient Mail Addresses Max. 8 addresses
Register all mail addresses to receive notifications from the X1 series unit.
Set the SMTP port number.
(Default: 25)
When using SSL/TLS communication, set "465" for the port number.
No authentication is performed.
Authentication is performed with the POP3 server. Configure the following settings.
• POP3 IP address
• Account name (within 63 one-byte characters)
• Password (within 63 one-byte characters)
Authentication is performed with the SMTP server. Configure the following settings.
• Selecting or deselecting the [Use SSL/TLS Communication] checkbox
• Account name (within 63 one-byte characters)
• Password (within 63 one-byte characters)
Displayed when [Authentication: POP before SMTP] is selected.
Set the POP3 IP address.
Displayed when [Authentication: SMTP-AUTH] is selected.
Select this checkbox when using SSL/TLS communications.
Set an account name used for connecting to the POP3 server or SMTP server.
Set a password used for connecting to the POP3 server or SMTP server.
[Mail Setting] tab window
Description
Description
Pressing each setting field
brings up the system
keyboard to be used for
configuration.
After changing the setting,
press the [Apply] switch to
confirm the setting.
5.4 Local Mode
1
2
3
4
5
6
7
8
9
10
5-31