Fuji Electric MONITOUCH X1 Series Hardware Specifications page 136

Advanced settings
The current status is
indicated in blue.
Item
Area to filter
System area (default)
All areas
Available overlay capacity
Refresh available overlay capacity
Overlay
Overlay is a mechanism to write to a RAM area instead of a write-protected area when writing occurs in that area. The overlay capacity is 1
GB, and X1 will not operate properly if there is no remaining capacity. Turn the power off and back on again, or reboot before remaining
capacity reaches "0".
This setting is displayed when [Write filter setting: Invalid] is selected.
Set the writing prohibited area.
Prohibits writing in the system area. Some areas are excluded.
Excluded areas (reading/writing enabled at all times)
• C:\MONITOUCH\X1\0 folder
• C:\MONITOUCH\X1\1 folder
• C:\MONITOUCH\X1\opcua folder
• C:\UserData folder
Prohibits writing to all areas of the internal storage.
* All areas of the internal storage are writing prohibited when [Write filter setting: Valid] is
selected. Even if you change the screen program or update the file, the X1 will return to
the state before the change by turning the power off and back on again, or rebooting.
This setting displayed when [Write filer setting: Valid] is selected.
You can check the available overlay capacity. Max.1 GB
Refreshes the display of available overlay capacity.
5.5 System Configurator
Back
Description
1
2
3
4
5
6
7
8
9
10
5-77