Fuji Electric MONITOUCH X1 Series Hardware Specifications page 144

Mode Setting
Set the operation mode of the security function.
The current mode is
indicated in blue.
Item
Invalid mode (default)
Valid mode
Updating mode
The whitelist is stored in the write filter area.
If updating of this list is attempted with [Write filter setting] set to [Valid], updating may fail and the X1 series unit may
malfunction after rebooting.
When adding to or updating the list, be sure to set [Write filter setting] to [Invalid].
When the mode is changed, a message for confirming rebooting is displayed. Press the [OK] switch to reboot.
The system security function is disabled. All files can be executed.
The system security function is enabled. Only applications that are on the whitelist can be executed.
The system security function is disabled.
An application installed in this state is automatically added to the whitelist.
The list is updated once every 30 minutes.
To immediately update the list, press the [Security Setting]  [Adding to list]  [Update list] switch.
After updating is finished, switch to [Valid mode] and operate.
X1 application and System Configurator updates are executed in updating mode.
5.5
Description
System Configurator
1
Back
2
3
4
5
6
7
8
9
10
5-85