Fuji Electric MONITOUCH X1 Series Hardware Specifications page 137

5 Operation Method
When [Write filter setting: Valid] and [Filter area settings: All areas] are selected, all areas of the internal storage are writing
prohibited and a "Warning" appears at the bottom of the local mode screen.
The following settings will return to the state before the change by turning the power off and back on again or by
rebooting.
If retaining the changes, change the settings while the state is [Write filter setting: Invalid] or [Filter area settings: System
area], and then change the state to [Write filter setting: Valid].
Screen program transfer
to the X1 series unit
Local Mode
System menu
Hard copy macro
Recipe
JPEG
Memo Pad
None volatile device
Alarm
Logging
Operation log setting
Data sheet
Wav macro
File setting macros
Add/edit/delete file in the internal storage
*1 The warning window appears when transferring screen program. Click [Yes] to force the transfer.
*2 The warning window appears when transferring screen program. Click [OK] to force the transfer.
*3 The error window appears when automatic uploading is performed. The screen program can not be transferred. Press [RUN] to display
the operation screen.
5-78
Function
*1
Editor
*2
Storage Transfer
*3
Automatic Upload
Change of settings
Security
User Settings
HDCOPY
HDCOPY2
HDCOPY3
File Delete
$L/$LD
PDF output
SAVE_VOLUME
COPY_FILE
MOVE_FILE
DEL_FILE
WRITE_FILE
Access
Internal storage
Configuration file
Configuration file
Storage folder
Storage folder
Storage folder
Storage folder
Storage folder
Storage folder
Storage folder
Storage folder
Storage folder
Configuration file
Storage folder
Storage folder
Retention using external USB storage
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled (data before saving to USB
storage is disabled)
Enabled (data before saving to USB
storage is disabled)
Enabled (data before saving to USB
storage is disabled)
Enabled
Disabled
Enabled
Enabled