Start Sys. Config. / Exit X1 App; Display System Menu - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

5.4.11 Start Sys. Config. / Exit X1 App

Pressing [Start Sys. Config.] in the menu icons brings up the Start System Configurator screen.
Pressing [Exit X1 App] brings up the Exit X1 Application screen.
Menu icon
Item
X1 App: Exit
System Configurator: Start

5.4.12 Display System Menu

Pressing [Display system menu] in the menu icons brings up the system menu and the status bar.
Refer to System Menu and Status Bar page 5-3
Menu icon
5-40
Description
Exits the X1 app and displays System Configurator.
Starts System Configurator without exiting the X1
app.
Start System Configurator screen
Exit X1 Application screen
This switch is valid when the X1 series unit is started with System
Configurator  [Startup mode selection] set to [System
Configurator] and the X1 app is started from System Configurator
 [Operation test].
This switch is valid when the X1 series unit is started with System
Configurator  [Startup mode selection] set to [HMI].
Display system menu screen
Remarks
System menu
Status bar