Sram Setting - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

5.4.9 SRAM Setting

Pressing [SRAM Setting] in the menu icons brings up the SRAM Setting screen.
This screen is used to format the SRAM area in the X1 series unit.
The following area in the X1 series unit is the SRAM area.
C:\MONITOUCH\X1\0\work\sram
Menu icon
If the SRAM area allocated in the X1 series unit is different from the one configured in the [SRAM/Clock Setting] window of V-SFT version
6, the [SRAM Setting] menu icon is changed as shown below.
When the format matches:
Item
SRAM Format Format
5-34
SRAM Setting screen
When the format differs:
SRAM Setting screen
Formats the SRAM area.
For the formatting procedure, refer to
Description
page 5-35.