Restoring settings in the screen program
This section explains how to restore the screen program settings after the communication settings were changed on the X1 series unit.
1. Press [Comm. Setting] in the menu icons. The Communication Setting screen is displayed.
2. To restore a specific communication parameter for PLCx, press [<<] and [>>] switches to select the connected device targeted for
restoration.
3. Press the [Restore Screen Data Settings] switch. The following dialog box appears.
To restore the screen program settings for only the currently displayed PLCx, press the [Reset PLCx Only] switch. To restore for all
PLCs 1 to 8, press the [Reset All] switch.
*
When restored, changes made on the X1 series unit are cancelled.
4. Communication settings are refreshed and the [System Information] screen is displayed.
5.4
Local Mode
1
2
3
4
5
6
7
8
9
10
5-37