Fuji Electric MONITOUCH X1 Series Hardware Specifications page 88

Item
IP Address
Subnet Mask
Gateway
MAC Address
External Access Service Port
Time-Out
Retrials
• The IP address of the X1 series unit is set on System Configurator. Refer to
• Set an IP address of a different network group for each of the following:
[LAN Setting], [LAN2 Setting], and [WLAN Setting] (only for wireless LAN models).
If set in the same network group, the system will not operate correctly.
• The gateway can be set for only one of the following:
[LAN Setting], [LAN2 Setting], and [WLAN Setting] (only for wireless LAN models).
Option
The [Option] tab window shows the DNS settings, etc.
Item
IP Address Setting Indicates the settings configured on the System Configurator  [Settings]  [IP Address Setting]  [WLAN] screen.
DNS Setting
Indicates the IP address of the WLAN port.
Indicates the subnet mask of the WLAN port.
Indicates the default gateway of the WLAN port.
Indicates the MAC address of the WLAN port.
Set the port number to be used for the EREAD, EWRITE, SEND, and MES macro commands and
Ethernet DLL functions.
No. 1024 to 65535 (excluding 8001)
Set the timeout period to be used for the EREAD, EWRITE, SEND, and MES macro commands and
Ethernet DLL functions.
Fixed to "0"
WLAN [Option] tab window
Description
Description
page 5-71.
5.4 Local Mode
1
2
3
4
5
6
7
8
9
10
5-29