Fuji Electric MONITOUCH X1 Series Hardware Specifications page 4

Thank you for selecting the MONITOUCH X1 series.
This manual describes operation procedures and errors of the X1 series in detail.
For correct use of the X1 series, you are requested to read through this manual to understand more about the product.
The manuals shown below are related manuals for the X1 series. Refer to them as necessary.
Manual Name
X1 Series
Reference Manual [1]
X1 Series
Reference Manual [2]
X1 Series
Setup Manual
X1 Series Hardware
Specifications
(this manual)
X1 Series
Connection Manual [1]
X1 Series
Connection Manual [2]
X1 Series
Connection Manual [3]
For further details about controllers (PLCs, temperature controllers, etc.), refer to the manual issued by each controller manufacturer.
Notes:
1. This manual may not, in whole or in part, be printed or reproduced without the prior written consent of Hakko Electronics
Co., Ltd.
2. The information in this manual is subject to change without prior notice.
3. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
4. All other company names or product names are trademarks or registered trademarks of their respective holders.
5. This manual is intended to give accurate information about MONITOUCH. If you have any questions, please contact your
local distributor.
Explains the functions and operation of the X1 series.
Explains the X1 series setup procedure, the installation procedure of V-SFT version 6,
the creation process of basic screen programs as well as how to transfer a created
screen program using V-SFT version 6.
Explains precautions for handling, hardware specifications and operating
procedures and provides an error list for the X1 series.
Explains the connection and communication parameters for the X1 series and
controllers in detail.
Preface
Contents Reference No.
1090NE
1091NE
1092NE
2024NE
2217NE
2218NE
2219NE