Startup Settings (Operation Mode) - Fuji Electric MONITOUCH X1 Series Hardware Specifications

Startup Settings (Operation Mode)

This screen is used to change the startup setting for when the power is turned on. After the setting is changed, the X1 series unit
automatically reboots.
The current status is
indicated in blue.
Item
Startup mode selection
HMI (Normal use)
System Configurator
Changing the setting
The X1 series unit automatically reboots when the setting is changed. The mode specified here starts after rebooting.
When the setting is changed from [System Configurator] to [HMI], the [Write filter setting] is automatically changed to [Valid].
Set the mode for starting when the power is turned on.
The HMI RUN mode starts.
System Configurator starts.
5.5 System Configurator
Description
1
Back
2
3
4
5
6
7
8
9
10
5-81