Communication Parameter - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

Communication Parameter

The [Communication Parameter] tab window is used to check and set parameters for connected devices.
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Parity
Stop Bit
Stat. No.
Local Port No.
Time-Out
Retrials
Send Delay Time
Start Time
Comm. Port No.
Code
Text Process
Comm. Error Handling
Recovery Condition
*1 The connection mode cannot be changed on the X1 series unit.
5-38
[Communication Parameter] tab window
Displays the communication parameters of PLCx.
Press an item to change the communication parameter on the X1 series unit.
For details, refer to the X1 Series Connection Manual.
Description
*1
Indicates communication
parameters of PLCx.
Pressing each setting field
brings up the system
keyboard to be used for
configuration.
After changing the
setting, press the
[Apply] switch to
confirm the setting.