Hdmi; Audio Output - Fuji Electric MONITOUCH X1 Series Hardware Specifications

2.4.4 HDMI

This connector is used to output images to an external monitor.
To show the different screens on the X1 application and external display, "Multi-Display Settings" must be configured in the screen
program.
To show the same screen on both the X1 application and an external display (duplication), no screen data setting is required.
Specifications
Item
Number of Ports 1
Connector HDMI Ver.1.4b
Output Resolution X1121iS: 1,280  800
X1151iS: 1,920  1,080
Max. cable length 5m
Notes
• Use a cable with ferrite cores attached on both ends. If a cable does not have ferrite cores, add them.
Images may not be displayed normally if any cable without ferrite cores is used.
• Images may not be displayed normally if the cable length exceeds 5 meters.
• Use a device and cable that conforms to standard HDMI specifications.

2.4.5 Audio Output

This connector is used to output audio to an external speaker.
Specifications
Item
Number of Ports 1
Connector 3.5 mm stereo mini jack
File Format WAV (PCM)
Sampling Frequency 8 / 16 / 32 / 48 / 96 / 192 kHz
Quantization Bit 8 / 16 / 24 bits
Audio Source Monaural / Stereo
Volume Control 8 levels
Max. Output Voltage 1.2 Vrms (0 dB)
Connected Amplifier Input impedance of 1 kW or more
Bottom view
Specifications
Bottom view
Specification
2.4 Specifications of Components
2-13
1
2
3
4
5
6
7
8
9
10