Names Of Components - Fuji Electric MONITOUCH X1 Series Hardware Specifications

2 Specifications
2.3

Names of Components

1
No. Name
1 Display
2 Touch Switch
3 POWER Lamp
4 Wireless communication antenna
5 Fall prevention fixture
6 Heat sink
7 Cable clamp hole
8 USB 2.0
9 USB 3.0
10 HDMI
11 LAN
12 LAN2
13 AUDIO
14 DIP switches
15 SERIAL
16 Power supply terminal
17 Mounting holes
2-8
4
2 3
Display area
Capacitive touch switch area
Lit green while power is ON
Two built-in antennas for wireless communication (only on models with built-in wireless LAN)
Fixtures to prevent the unit from falling when installed on a mounting panel
Heat sink for radiating heat. Do not touch because it becomes extremely hot.
Used to fix USB and HDMI cables in place
USB version 2.0 Type-A port, 2 channels
USB version 3.0 Type-A port, 2 channels
External monitor output port, 1 channel
Ethernet communication port
Audio output connector, 1 channel, for external speaker connection
Sets the terminating resistance for serial communication, etc. Refer to
Serial communication port
Terminal block for 24V power supply
Holes for fitting mounting fixtures (8 positions). Refer to
5
6
7
5
8 9 10 11 12
17
Description
17
16
5
13 1415 16
page 2-17.
page 3-1.