Shutdown - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5.5.12 Shutdown

Shutdown the system before turning the X1 series unit power off.
Be sure to press the [Shutdown] switch if [Write filter setting] is set to [Invalid].
If the power is turned off without pressing the [Shutdown] switch, the file system may become damaged and recovery may
be impossible.
Refer to "Write Filter Setting" page 5-75
[Write filter setting] set to [Valid]
[Write filter setting] set to [Invalid]
Turn the power off 15 seconds after the screen goes out.
The power lamp remains lit and the screen goes out.
5.5 System Configurator
5-101
1
2
3
4
5
6
7
8
9
10