Display Brightness Setting - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

Display Brightness Setting

This screen is used to set the brightness of the screen.
The setting cannot be changed when [Write filter setting] is set to [Valid].
Set [Settings]  [Write filter setting] to [Invalid]. Refer to
The setting can also be changed by displaying the system menu in RUN/Local mode and pressing the [Display] switch.
Item
Max/Medium/Minimum
Slider Switch
*1 When the brightness is reduced, the backlight life may be slightly extended.
*2 The brightness can be adjusted in 128 levels by using the BRIGHT macro command. For details, refer to the V9 Series Macro Reference Manual.
The brightness setting is retained internally by the X1 series unit and is retained even if the power is turned off. Note, however, that brightness is
retained in 10 levels and therefore the screen brightness may change after rebooting.
X1 Series Unit
0
1
2
3
4
5
6
7
8
9
5-80
Description
Brightness adjustment is possible in 3 levels.
Brightness adjustment is possible in 128 levels.
BRIGHT Macro
Command
0 to 25
26 to 38
39 to 50
51 to 63
64 to 76
77 to 88
89 to 101
102 to 114
115 to 126
127
"Write Filter Setting" page
Brightness levels are equivalent to the BRIGHT macro
*1
command values of 0, 64, and 126.
The brightness level of [Minimum] is about 3% the level
of [Max].
*2
Brightness
Bright Max
Medium
Minimum
Dark Note that the screen is completely dark with no visibility.
5-75.
Back
Supplementary Remarks
Remarks