Buzzer Setting
The [Buzzer Setting] tab window on the System Setting screen is used to change the buzzer sound.
Item
Change Buzzer Setting
Standard
Short
Continuous
OFF
Backlight Setting
The [Backlight Setting] tab window on the System Setting screen is used to change the backlight control setting.
Item
Change Backlight
Action
Setting
Backlight OFF Time
Control during Backlight Power ON
[Buzzer Setting] tab window
Changes the buzzer sound.
[Backlight Setting] tab window
Always ON
Changes the backlight control setting.
For details on the difference between these actions, refer to the X1 Series Reference Manual 1.
AUTO 1
AUTO 2
AUTO 3
Manual
This item can be set only when [AUTO 1], [AUTO 2], or [AUTO 3] is selected.
Set the time to elapse until the backlight is turned off.
This item can be set only when [Manual] is selected.
Select the backlight status when the power is turned on and when the operation mode is changed
from STOP to RUN.
Press the [Apply] switch
to confirm the setting.
Description
Press the [Apply] switch
to confirm the setting.
Description
5.4
Local Mode
1
2
3
4
5
6
7
8
9
10
5-43