Overview - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5.1

Overview

X1 Screen Modes
The X1 series has the following screen modes.
X1 App (RUN mode) RUN mode screen for communicating with an upper-layer computer, PLC, etc.
A screen program created using the V-SFT version 6 configuration software needs to be transferred to the X1
series unit to display this mode.
X1 App (Local mode) Communication with connected device is stopped.
This mode screen shows various information about the X1 series unit, such as system information, screen
program information, etc.
System Configurator For configuring Windows functions
This app is used to display the File Explorer and configure items that are accessed frequently, such as IP
address settings.
When more advanced settings are necessary, press [Advanced mode] to switch to the Windows desktop and
then configure settings.
Note that any failure resulting from operations done via the Windows desktop are not covered by the
operation guarantee.
Screen
5.1 Overview
1
Refer to
page 5-15 2
3
4
page 5-16
5
6
7
page 5-66
8
9
10
5-1