Fuji Electric MONITOUCH X1 Series Hardware Specifications page 73

5 Operation Method
Status Bar Details
The following items are displayed on the status bar.
Item
Always displayed
LAN
LAN2
Wireless LAN status
(only for models with wireless
LAN)
PLC 8WAY connection status
Close
5-14
Wireless LAN status (only for wireless LAN I/F models)
LAN2 status (only for additional wired LAN I/F models)
LAN status
Display at all times valid/invalid
Select whether or not to display the status bar at all times.
If valid, the status bar is displayed at all times even after the operation mode is switched over between RUN and Local.
Display at all times:
valid
These icons indicate the link status of the LAN/LAN2 connection.
Link established
When the icon is pressed, the following information is displayed.
• IP address
• Subnet mask
• Gateway
• Baud rate
Each item can be configured on the System Configurator  [Settings]  [IP Address Setting] screen. Refer to
This icon indicates the link status and signal strength of wireless LAN connection.
Link established
When the icon is pressed, the following information is displayed.
• IP address
• Subnet mask
• Gateway
• SSID
Each item can be configured on the System Configurator  [Settings]  [IP Address Setting] screen. Refer to
These icons indicate the status of communication with a connected device when [Comm. Error Handling: Disconnect] is
selected.
Link established
When the [PLC 8WAY Connection Status] icon is pressed with no link established, the detailed information can be viewed.
The information is updated every five seconds.
If the [PLC 8WAY Connection Status] icon is pressed with a link established, nothing is displayed.
• Detailed information
Item
Time
Error message
Measure
Hides the status bar.
PLC 8WAY connection status
Description
Display at all times:
invalid
Cable disconnected or
link not established
Cable disconnected or
link not established
Link not established When connected with the simulator*, the
following icon is displayed instead.
* For simulator details, refer to
Displays the time when the communication error was detected.
Displays the contents of the communication error. Refer to
Error" page 6-5.
Displays a countermeasure to the communication error.
Close
page 5-41.
Description
"Communication
page 5-69.
page 5-69.