Fuji Electric MONITOUCH X1 Series Hardware Specifications page 64

*1 When the brightness is reduced, the backlight life may be slightly extended.
*2 Brightness levels are equivalent to the BRIGHT macro command values of 126, 64, and 0.
*3 The brightness can be adjusted in 127 levels by using the BRIGHT macro command. For precautions on using a macro command, refer to
Brightness Setting" page 5-80.
*4 When configuring user settings in Local mode, refer to
*5 If using the macro commands [HDCOPY]/[HDCOPY2]/[HDCOPY3], be sure to check that $s1050-0 is turned off before removing the storage device.
If using the macro commands [COPY_FILE]/[MOVE_FILE]/[DEL_FILE]/[READ_FILE]/[WRITE_FILE], be sure to check that $s1050-4 is turned off before
removing the storage device. While the local mode screen is being displayed, there is no need to check the bit status.
Security
When the [Security] switch is pressed in the system menu, the security level can be changed (by logging in/out) and user names and their
passwords for the security function can be registered.
Login/Logout
The security level can be changed.
Indicates the current
security level.
Allows login by entering a specified
user name and password.
"User Settings" page 5-57.
5.2 System Menu and Status Bar
Pressing here displays
the system keyboard.
Returns to the previous screen.
Resets the security level to "0" and
returns to the previous screen.
1
"Display
2
3
4
5
6
7
8
9
10
5-5