Advertisement
Conventions
ARM DDI 0275D
Appendix B Integrating the ETB11
This appendix describes how to integrate the ETB11 if you are not using
the ETK11 Integration Kit.
This section describes the conventions that this manual uses:
•
Typographical
•
Timing diagrams on page xii
•
Signal naming on page xii
•
Numbering on page xiii.
Typographical
This manual uses the following typographical conventions:
italic
Highlights important notes, introduces special terminology,
denotes internal cross-references, and citations.
bold
Highlights interface elements, such as menu names. Denotes
ARM processor signal names. Also used for terms in descriptive
lists, where appropriate.
Denotes text that you can enter at the keyboard, such as
monospace
commands, file and program names, and source code.
Denotes a permitted abbreviation for a command or option. You
monospace
can enter the underlined text instead of the full command or option
name.
Denotes arguments to monospace text where the argument is to be
monospace italic
replaced by a specific value.
monospace bold
denotes language keywords when used outside example code.
< and >
Angle brackets enclose replaceable terms for assembler syntax
where they appear in code or code fragments. They appear in
normal font in running text. For example:
•
•
Copyright © 2002, 2003 ARM Limited. All rights reserved.
MRC p15, 0 <Rd>, <CRn>, <CRm>, <Opcode_2>
The Opcode_2 value selects which register is accessed.
Preface
xi
Advertisement
Chapters
