Advertisement
Preface
About this document
Product revision status
Intended audience
Using this manual
x
This document is the technical reference manual for the ARM11 Embedded Trace Buffer
(ETB11) r0p1.
The rnpn identifier indicates the revision status of the product described in this manual,
where:
rn
Identifies the major revision of the product.
pn
Identifies the minor revision or modification status of the product.
This document has been written for experienced hardware and software engineers who
want to design or obtain trace information from chips that use ARM cores with the ETM
facility.
This document is organized into the following chapters:
Chapter 1 Introduction
Read this chapter for an overview of the ETB11.
Chapter 2 Functional Description
Read this chapter for a description of the major functional blocks,
configurability, read and write timing information, clocks, and resets.
Chapter 3 Programmer's Model
Read this chapter for a description of the registers and programming
information.
Chapter 4 Timing Requirements
Read this chapter for a description of the ETB11 AC timing
requirements.
Appendix A Signal Descriptions
This appendix lists the ETB11 signals.
Copyright © 2002, 2003 ARM Limited. All rights reserved.
ARM DDI 0275D
Advertisement
Chapters
