DXS/DWS-3200 series CLI Reference Guide
show wlan rogue-aps configuration
The show wlan rogueaps configuration Privileged EXEC mode command displays information about rogue
APs detection configuration.
Syntax
show wlan rogue-aps configuration [name | mac-address]
Parameters
•
name — Specify the AP name. (Range: 1-32 characters)
•
mac-address — Specify the AP MAC address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about rogue APs detection configuration.
Console# show wlan rogue-aps configuration
Rogue APs detection is enabled.
AP name
-----------
AP1
AP1
AP2
AP2
Radio
--------
a
g
a
g
Scanning
--------
Enabled
Enabled
Enabled
Enabled
Page 549
Interval
-------------
Long
Long
Long
Long